ERGONOMIC RISK ASSESSMENT OF GADUNG PEELERS USING NORDIC BODY MAP (NBM) AND OVAKO WORK POSTURE ANALYSIS (OWAS) METHODS

  • Nima Eka Nur Rahmania Politeknik Kesehatan Kerta Cendekia
  • Achmat Kuncoro Politeknik Kesehatan Kerta Cendekia
  • Riza Irianingtyas Politeknik Kesehatan Kerta Cendekia
  • Geovania Nage Nuwa Politeknik Kesehatan Kerta Cendekia
Keywords: Ergonomic Risk Assessment, Gadung Peeler Worker, NBM, OWAS

Abstract

Background: The activity of peeling gadung as a raw material for making gadung chips is done manually and repeatedly with an unnatural working posture and can cause musculoskeletal disorders (MSDs). Preventive measures need to be taken by carrying out ergonomic risk assessments. Objectives: The research aimed to analyze the level of ergonomic risk in MSDs using the Nordic Body Map (NBM) and Ovako Work Posture Analysis (OWAS) methods. Methods: The research method used was an analytical method with a cross-sectional research design. This research was conducted in the home industry gadung chips, Kediri in August 2024. The sampling technique was purposive sampling with a total sample of 10 gadung peeler workers. The variables in this study were the severity of muscle complaints and work posture (back, arm, leg, and load movements) as the risk level for MSDs. The type of data collection technique used was a field study by filling out the NBM questionnaire to determine the severity of MSDs. Working posture (back, arm, leg, and load movements) was also observed using the OWAS method by filling in a form. The results of the analysis will provide results as a reference for taking appropriate action to overcome ergonomic risks. Results: Based on data analysis using the NBM showed the percentage of MSDs, that are right shoulder, right wrist, and right hand had the highest proportion of scores for complaints of pain that always occurred (100%). The left wrist and shoulder area (96%), stiffness in the lower neck (92%), pain in the back (91%), pain in the waist (90%), and also pain in the right and left knee areas for lower limbs. The results of the ergonomic risk level analysis using the OWAS method showed that the working posture is included in the moderate risk category (score 2). Conclusion: Corrective action is needed to prevent musculoskeletal disorders such as improving work posture, doing stretching exercises before and after work and designing ergonomic work chairs.  

Downloads

Download data is not yet available.

References

Akbar AK., Cahyani C., Firmansyah F., Ayu F. (2022). Analisis Keluhan Musculoskeletal Disorders dan Kelelahan Kerja Menggunakan Metode NBM dan IFRC Pada Industri Sandal UD Satria Sidoarjo. Jurnal Pengabdian Kepada Masyarakat,

(4),50-2509. https://doi.org/10.55681/swarna.v1i4.202 DOI: https://doi.org/10.55681/swarna.v1i4.202

Ardi, S. Z., Hidayah, Q., & Dahlan, U. A. (2022). Factors Related of Musculoskeletal Disorders (MSDS) Complain in Online Study at Public Health University X. Jurnal Ergonomi Indonesia, 8(2), 23–29. https://doi.org/10.24843/JEI.2022.v08.i02.p03

Azmi N., Sukania W., Samsudin J. (2016). Analisis Beban Kerja Pada Pekerja Proses Pembuatan Dimsum. Jurnal Ilmiah Teknik Industri, 4(3), 184-191. https://doi.org/10.24912/jitiuntar.v4i3.1546 DOI: https://doi.org/10.24912/jitiuntar.v4i3.1546

Bagas RP., Prastawa H. (2023). Analisis Tingkat Kelelahan Serta Keluhan Anggota Tubuh Menggunakan Metode Swedish Occupational Fatigue Inventory (SOFI) Dan Nordic Body Map (NBM) Studi Kasus Pekerja Divisi Produksi PT XYZ. Industrial Engineering Online Journal, 12 (4)

Danur, S. M. B., Wahyu, A., & Thamrin, Y. (2022). Hubungan Postur Kerja dan Masa Kerja terhadap Keluhan Muskuloskeletal pada Pengemudi Bus. Hasanuddin Journal of Public Health, 3(2) DOI: https://doi.org/10.30597/hjph.v3i2.21894

Firdaus M., Ismiyah E,. Negoro YP. (2022). Analisa Postur Kerja Karyawan Bengkel Bubut Sinta Jaya Menggunakan Metode Ovako Work Posture Analysis System (OWAS). Jurnal Sains, Teknologi dan Industri, 20(1), 209-217. http://dx.doi.org/10.24014/sitekin.v20i1.19802

Maudy, C. K., Ruliati, L. P., & Doke, S. (2021). Keluhan Musculoskeletal Disorders dan Kelelahan Kerja pada Tenaga Kerja Bongkar Muat di Pelabuhan Tenau. Media Kesehatan Masyarakat, 3(3), 312–321. https://doi.org/10.35508/mkm DOI: https://doi.org/10.35508/mkm.v4i3.3392

Ramadhani RM. (2019). Analisis Penilaian Ergonomi Postur Kerja Ketika Memasang Roda Dengan Metode Ovako Work Posture Analysis System Dan Rapid Entire Body Assesment Untuk Mencegah Musculoskeleal Disorders Analisis. J. Tek. Dan Keselam. Transp, 2, 233-243. https://doi.org/10.46447/ktj.v6i1.44 DOI: https://doi.org/10.46509/ajtk.v2i2.148

Tarwaka. (2010). Ergonomi Industri, Dasar-Dasar Pengetahuan Ergonomi Dan Aplikasi Di Tempat Kerja, Ed 1, Cet. 1. Surakarta : Harapan Press

Trimala A., Damayanti R., Lutfiya I., Rahmania N. (2023). The Relationship Between Shift Work And Individual Factors With Work Fatigue In Workers In The Production Area Of The Manufacturing Industry. Journal of Industrial Hygiene and Occupational Health, 8(1), 36-49. http://dx.doi.org/10.21111/jihoh.v8i1.9247 DOI: https://doi.org/10.21111/jihoh.v8i1.9247

Wiranto, A., Ramdan, I. M., & Lusiana, D. (2019). Faktor Yang Mempengaruhi Keluhan Musculoskeletal Disorder Pada Pekerja Penggilingan Padi Kabupaten Penajam Paser Utara. Husada Mahakam: Jurnal Kesehatan, 4(8), 439–452. https://doi.org/10.35963/hm:jk.v4i8.153 DOI: https://doi.org/10.35963/hm:jk.v4i8.153

Published
2024-12-11
How to Cite
Rahmania, N. E. N., Kuncoro, A., Irianingtyas, R., & Nuwa, G. N. (2024). ERGONOMIC RISK ASSESSMENT OF GADUNG PEELERS USING NORDIC BODY MAP (NBM) AND OVAKO WORK POSTURE ANALYSIS (OWAS) METHODS. Nurse and Health: Jurnal Keperawatan, 13(2), 374-381. https://doi.org/10.36720/nhjk.v13i2.746
Section
Original Research Article
Abstract viewed = 18 times
PDF downloaded = 10 times iThenticate downloaded = 1 times