ANALYSIS OF POTENTIAL HAZARDS FOR GADUNG CHIPS WORKERS USING THE HIRARC METHOD IN RINGINSARI VILLAGE KEDIRI REGENCY
Abstract
Background: One of the industrial sectors that has a high risk of danger is the informal sector, one of which is the home industry of making chips. Knowledge about occupational health and safety is one of the factors that cause health problems and incidents in the workplace. Therefore, it is necessary to handle the problem of danger by identifying risks and controlling in minimizing the occurrence of accidents and occupational health disorders. Objectives: The purpose of this research was to determine the risk of work accidents, determine the level of work accident risk and provide suggestions for controlling the risk of work accidents that can occur in the cassava chips manufacturing industry. Methods: This study is a descriptive observational study, which is a research method that provides an in-depth description of the process of making gadung chips in a home industry which is then analyzed and compared based on existing reality. Observations are made directly to ensure that the process reflects daily practices in the home industry. The study was conducted with a cross-sectional approach, data will be collected at one time to understand the conditions at that time. The data analysis technique used in this study is descriptive analysis and risk identification with the HIRARC method, namely: 1) Hazard identification, 2) Risk Assessment (Risk Analysis), 3) Determining Controls, 4) Documentation Socialization and Implementing Controls Results: 33 work accident risks were found that could occur in the process of making combined chips. The level of work accident risk from 33 risks obtained 42% low risk hazards, 21% medium risk hazards, 30% high risk hazards and 7% very high risk hazards Conclusion: Based on the research results, it can be concluded that: 1) 33 work accident risks were found that could occur in the process of making combined chips. 2) the level of work accident risk from 33 risks obtained 42% low risk hazards, 21% medium risk hazards, 30% high risk hazards and 7% very high risk hazards. 3) there are 33 risk control studies consisting of substitution control, administration, and use of PPEDownloads
References
Aini, S.Q. (2015). Hubungan Paparan Debu dengan Kapasitas Vital Paru Pekerja Batu Bara. Argogemd Unila, 2(4), 493-499.
Anggarani, A.P.M., Djoar, R. K., Zefanya, E.D., & Wijayanti, S.D. (2022). Muskuloskeletal Disorder (MSD’s) pada Pekerja Kantoran di Surabaya. Jurnal Endurance:Kajian Ilmiah Problem Kesehatan, 7(2), 323-328. DOI: https://doi.org/10.22216/jen.v7i2.824
Campbell, R. (2017). Electycal Fire. Nasional Fire Protection Association. Amerika. 118 Halaman.
Danamik, R.A., Priyambada, Pamardi, P.L. (2024). Masalah dan Penanganan Kesehatan dan Keselamatan Kerja (K3) Pada Proses Panen diperkebunan Kelapa Sawit. AE Innovation Journal. 2(1), 37-50.
Dewi, Y.S., dan Ikhssani A. 2021. Identifikasi Potensi Bahaya dan Risiko Keselamatan dan Kesehatan Kerja pada Pabrik Tahu House Of Tofu. Jurnal Ilmu Kesehatan, 2(4), 121-130 DOI: https://doi.org/10.37148/arteri.v2i4.185
ILO. (2018). Mengintegrasikan K3 Ke dalam Usaha Mikro, Kecil dan Menengah di Indonesia. https://www.ilo.org/jakarta/info/public/pr/WCMS_837434/langen/index.html.
Keputusan Menteri Kesehatan (2022). Keputusan Mentri Kesehatan No.1405/MENKES/SK/XI/2022 Tentang Persyaratan Kesehatan Lingkungan Kerja Perkantoran dan Industri.
Mock CN, Nugent R, Kobusingye O, Smith KR. (2017). Disease Control Priorities, Third Edition (Volume 7): Injury Prevention and Environmental Health [Internet]. The World Bank; 2017 [cited 2021 Aug 16]. Available from: http://elibrary.worldbank.org/doi/book/10.1596/978-1-4648-0522-6
Peraturan Menteri Kesehatan Republik Indonesia. (2016). Peraturan Menteri Kesehatan Republik Nomor 70 Tahun 2016 Tentang Standar dan Persyaratan Kesehatan Lingkungan Kerja Industri.
Prayoga, D., Zuki, M., & Hidayat, L. (2023). Anaysis of Work Accident Risk CV. Brens Bakery Using The HIRARC Method (Hazart Identification Risk Assessment And Risk Control). Jurnal Agroindustri, 13(2), 202-217. DOI: https://doi.org/10.31186/jagroindustri.13.2.202-217
Rangkang JR, Mautang T, Paturusi A. Hubungan Antara Pelaksanaan Program Kesehatan Keselamatan Kerja Dengan Kejadian Kecelakaan Kerja Pada PT. Cahaya Nataan Di Ratahan 2020. Physical: Jurnal Ilmu Kesehatan Olahraga. 2 (1),123–30 DOI: https://doi.org/10.53682/pj.v2i1.1128
Roihan, A., Permana, A., & Mila, D. (2016). Monitoring Kebocoran Gas Menggunakan Mikrokontroler Arduino UNO dan ESP8266 Berbasis Internet of Things. ICIT Journal, 2(2), 170-183. DOI: https://doi.org/10.33050/icit.v2i2.30
Suryani, M. (2019). Analisis Bahaya Dan Risiko Pada Pekerjaan Pemasangan Antena Tower Bts Dengan Menggunakan Metode Hiradc Di Pt Xerindo Teknologi Jakarta 2019. Skripsi. Fakultas Kesehatan Masyakarat. Universitas Binawan Jakarta
Copyright (c) 2024 Riza Irianingtyas, Ellyza Setya Maryiantari, Tigowati, Geovania Nage Nuwa
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with Nurse and Health: Jurnal Keperawatan agree to the following terms:
- Authors retain copyright licensed under a Creative Commons Attribution-NonCommercial 4.0 (CC BY-NC 4.0), which allows others to remix, tweak, and build upon the authors' work non-commercially, and although the others' new works must also acknowledge the authors and be non-commercial, they don't have to license their derivative works on the same terms.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access). Authors can archive pre-print and post-print or publisher's version/PDF.
_resize1.jpg)
